EishFIELDLINK

CONNECTED FARM TECHNOLOGY

YOUR FARM.
CONNECTED.

A clearer view of your land,
water and equipment.

FIELDLINK is our farm monitoring and irrigation control project in development. It aims to bring tank levels, soil sensor readings, supported irrigation controls and equipment tracking onto one screen. Explore the demonstration below; actual capabilities depend on the hardware, connectivity and installation.

In development · Explore the concept

FIELDLINK / FARM OVERVIEWCONCEPT DEMO
WATER TANK78%
Example reading
IRRIGATION ZONE 3 ActiveVineyard block B · Demo
MAIN PUMP RunningIllustrative equipment status

01 / BUILT AROUND YOUR LAND

ONE VIEW.
MORE CONTROL.

A simple example: a sensor measures your tank level, sends the reading, and you see how much water is left. Control needs suitable hardware as well.

02 / EXPLORE YOUR DATA

SEE YOUR FARM
DIFFERENTLY.

Explore the example devices and three irrigation zones.
Change a reading or try a control.

FIELDLINK CONTROL CENTREILLUSTRATIVE DEMO

Watch irrigation pause and resume as the example tank refills.

NEW TO FIELDLINK?

Let us show you what to look for.

Try a short walkthrough: follow the water, create a warning, then restore the normal example.

TRY A SCENARIO
EXAMPLE FARM / WESTERN CAPE
Water flow Device links
Illustrative aerial image · No real farm data
EXPLORE:
DEMO ACTIVITY
  1. Example farm ready. Select a device or try a scenario.
Demo mode · All readings are examplesControls affect this demonstration only.

03 / WHAT WOULD I USE IT FOR?

START WITH
A SIMPLE QUESTION.

These are possible uses to discuss for your site, not claims about completed installations.

“How much water is left?”

A suitable tank sensor measures the level. The system receives the reading and displays it on your screen.

In this demoTry a low tank, then refill it and watch the level change.
TRY THE WATER EXAMPLE ↗

“Has the pressure dropped?”

A pressure reading can show when a pump line is outside its expected range. That reading needs a suitable sensor.

In this demoTrigger low pressure. The pump turns red and the animated flow stops.
TRY THE WARNING EXAMPLE ↗

“What is the soil reading?”

A soil sensor reports conditions where it is placed. Useful readings depend on placement, soil and calibration.

In this demoSee an example dry-soil warning. It is not a watering recommendation for your crop.
TRY THE SOIL EXAMPLE ↗

“Is that zone watering?”

A compatible valve controller can report or change a valve state. Actual water flow needs its own suitable measurement.

In this demoStart and stop an example zone and follow the blue water route.
TRY THE IRRIGATION EXAMPLE ↗

A valve shown as open does not, by itself, prove water is flowing. Real installations need the right measurements for the question you want answered.

04 / FROM THE FIELD TO YOUR SCREEN

CONNECTED WITH
PURPOSE.

01 / MEASURE & CONTROL

Start with your equipment.

Choose what you need to see or manage, then match it with suitable sensors and control hardware.

  • Tank levels and soil moisture readings
  • Irrigation valves and pump status
  • Power and battery readings from compatible equipment

THE RESULT Useful information from the field.

02 / CONNECT THE FIELD

Bring the readings home.

Suitable field devices send small readings and commands through a connection designed for your property.

  • LoRa links for compatible low-data devices
  • A gateway to bring field devices together
  • Power, terrain and coverage assessed for the site

THE RESULT A connection that fits your land.

03 / UNDERSTAND & ACT

See it in your Control Centre.

The FIELDLINK desktop concept brings your authorised devices onto a map of your own farm.

  • Select a device to see its readings
  • Identify equipment that needs attention
  • Use supported controls with the right permissions

THE RESULT A clearer view. A practical next step.

Your farm. Your people. Your permissions.

FIELDLINK is being designed so that each farm has its own private view. Being on the same network should not give another farmer access to your map, equipment or readings.

Your own farm viewMaps and devices belong to the authorised farm.Access you chooseOnly authorised people should see or control equipment.Sharing by permissionCross-farm access requires explicit authorisation.
PRIVACY
BY DESIGNDevelopment principle

05 / STRAIGHT ANSWERS

GOOD QUESTIONS.
PLAIN ANSWERS.

No tech knowledge needed.
Open a question to see the answer.

01What is FIELDLINK, in simple terms?

A farm monitoring and control project by Eish Systems. The aim is to bring readings from suitable equipment into a map-led Control Centre, with supported controls where the right hardware is installed. FIELDLINK is still in development; this page lets you explore the idea.

02Is this a real farm with live readings?

No. This is an interactive example. The aerial picture is illustrative, the readings are made up for the demonstration, and the buttons change the demo only. Nothing on this page opens a real valve or operates a real pump.

03What are a sensor, a node and a gateway?

A sensor measures. A node sends or receives. A gateway passes messages between systems. For example, a tank sensor measures the water level; a field node sends that reading; and a gateway can pass it to the system showing your farm. The exact arrangement depends on the network design. LoRa is the radio technology; LoRaWAN is one network protocol that uses it.

Technical background ↗
04Does it need internet or a SIM card at every sensor?

It depends on the design, not just the word “wireless”. A LoRa radio link is different from a cellular internet connection, so a LoRa sensor does not inherently need its own SIM. Cloud services and access from outside the farm need suitable connectivity. FIELDLINK’s exact offline functions, map availability and remote-access options still need to be confirmed and tested for the installed system.

Technical background ↗
05How far can it reach across my farm?

There is no honest single distance for every farm. Obstacles, antenna performance, device placement and radio settings affect range. We would need to assess and test your site before promising coverage. A distance achieved on another property does not guarantee the same result on yours.

Technical background ↗
06Will it work with the pumps, valves or inverter I already own?

Possibly, but compatibility must be checked first. We need the make, model, interfaces and intended function. A device being “smart” does not automatically mean FIELDLINK can read or control it. Send the equipment details with your enquiry; support is not assumed.

07Can it send CCTV video over LoRa?

Not as a normal CCTV video link. LoRa/LoRaWAN is suited to small messages rather than continuous high-bandwidth video. Cameras need an appropriate separate connection. This demo does not show CCTV streaming.

Technical background ↗
08Are the readings and commands always instant?

No instant-response guarantee is being made. Real update rates depend on the device, power use, radio settings and network design. The demo responds quickly to make it easy to understand. Its animations are not a promise of real-world update speed.

Technical background ↗
09Will the real system automatically stop a pump when pressure is low?

The stop shown here is demonstration behaviour. It does not prove a real pump-protection system has been built. Automatic actions need suitable sensing and control hardware, agreed operating rules, and testing. The correct response to a fault must be established for the actual installation.

10Can field devices run on batteries or solar?

Some can, with suitable equipment and sizing. Battery life depends on the complete device and how it operates. Solar needs a suitable panel, charging system and battery where required. A small solar-powered sensor node does not supply the energy to run an irrigation pump.

Technical background ↗
11Can another farmer see my map or control my equipment?

The design goal is a separate, authorised view for each farm. Cross-farm access should require explicit permission. Those controls must be implemented and tested before real client use. The public website contains example data only; it is not access to a client farm.

12What will it cost, and what should I send you?

Ask us to scope your site first. This page does not publish a fixed product price, subscription or guaranteed package. Tell us your area, the equipment you have, what you want to measure or control, and any power or connectivity constraints. We can then discuss what is practical and what is still in development.

Where do the technical explanations come from?

General radio facts were checked against the primary sources below on 22 October 2026. These describe the underlying technology, not proof that FIELDLINK has implemented every function. They do not imply endorsement of FIELDLINK.

FIELDLINK status, compatibility and access-control goals are stated separately from these general technical facts.

06 / LET’S TALK FIELDLINK

WHAT WOULD YOU
LIKE TO CONNECT?

Tell us about your property, the equipment you have and what you’d like to see or control. We’ll discuss what’s practical for your site.

PLAN YOUR FIELDLINK PROJECT ↗

FIELDLINK is in development. Scope, compatibility and availability are confirmed per project.